Operation and Maintenance of Gel Storage Tank Agitator

1) Purpose

The purpose of this SOP is to outline the procedures for operating and maintaining the gel storage tank agitator to ensure proper mixing and storage of gel during the manufacturing process.

2) Scope

This SOP applies to all personnel involved in the operation, cleaning, and maintenance of the gel storage tank agitator in the manufacturing facility.

3) Responsibilities

It is the responsibility of production operators, maintenance staff, and quality control personnel to follow this SOP to ensure proper operation and maintenance of the gel storage tank agitator.

4) Procedure

4.1 Preparation

1. Verify the availability of gel batch ready for mixing in the storage tank.
2. Inspect the agitator system, including blades and motor, to ensure they are clean and in good working condition.

4.2 Mixing Process

1. Start the agitator system and adjust the speed as per batch requirements.
2. Add the gel batch into the storage tank under controlled conditions.
3. Monitor the mixing process to ensure uniform distribution of ingredients.

4.3 Cleaning and Maintenance

1. After completing the mixing process, stop the agitator and drain any remaining gel from the tank.
2. Clean the agitator blades and tank interior using approved cleaning agents and procedures.
3. Inspect and lubricate the agitator motor and bearings as needed.

5) Abbreviations, if