Standard Operating Procedure for Preventing Contamination in Lotions Production
1) Purpose
The purpose of this SOP is to establish procedures for preventing contamination during lotions production to ensure product quality, safety, and compliance with regulatory requirements.
2) Scope
This SOP applies to all personnel involved in lotions production activities within the pharmaceutical manufacturing facility, including formulation, processing, packaging, and storage.
3) Responsibilities
The responsibilities for executing this SOP are as follows:
Production Operators:
- Follow good manufacturing practices (GMP) and standard operating procedures (SOPs) to prevent contamination.
- Maintain personal hygiene and adhere to gowning requirements.
Quality Assurance (QA) Personnel:
- Conduct routine inspections and environmental monitoring to detect potential sources of contamination.
- Review and approve cleaning and sanitization procedures.
Facility Management:
- Ensure cleanliness and maintenance of facilities, equipment, and utilities.
- Implement pest control measures and maintain adequate ventilation and air filtration systems.
4) Procedure
4.1 Facility Design and Layout:
- Design facilities to facilitate efficient workflow and minimize cross-contamination risks.
- Segregate areas for different production stages (e.g., formulation, filling, packaging).
4.2 Personnel Hygiene and Gowning:
- Establish and enforce gowning procedures, including attire requirements and hand hygiene practices.
- Provide training on proper gowning techniques and hygiene practices.
4.3 Equipment Cleaning and Maintenance:
- Implement cleaning and sanitization procedures for equipment and utensils used in lotions production.
- Ensure equipment is maintained and calibrated according to
4.4 Raw Material Handling:
- Inspect and quarantine raw materials upon receipt until they are tested and approved for use.
- Store raw materials in designated areas with appropriate labeling and segregation.
4.5 Environmental Monitoring:
- Conduct routine environmental monitoring of production areas for airborne particles, microbial contaminants, and other potential sources of contamination.
- Take corrective actions promptly in response to monitoring results that exceed predefined limits.
5) Abbreviations, if any
SOP: Standard Operating Procedure
GMP: Good Manufacturing Practice
QA: Quality Assurance
6) Documents, if any
- Cleaning and Sanitization Records
- Environmental Monitoring Reports
- Training Records
7) Reference, if any
- ICH Q9: Quality Risk Management
- USP <1072>: Disinfectants and Antiseptics
8) SOP Version
Version 1.0
