SOP for Angle of Repose Testing in Powders

Standard Operating Procedure for Angle of Repose Testing in Powders

1) Purpose

The purpose of this SOP is to outline the procedure for determining the angle of repose of powder formulations in the pharmaceutical industry to assess their flow properties and particle cohesion.

2) Scope

This SOP applies to all personnel involved in angle of repose testing of powder formulations within the pharmaceutical quality control (QC) department.

3) Responsibilities

Analytical Chemist: Responsible for performing angle of repose testing and documenting results.
Quality Assurance (QA) Department: Responsible for reviewing and approving the angle of repose testing procedure and results.

4) Procedure

Sample Collection:
1. Select representative samples from different batches or lots according to the sampling plan.
2. Ensure samples are free-flowing and homogeneous.
Apparatus Setup:
1. Set up the angle of repose apparatus on a stable and level surface.
2. Adjust the height of the funnel to achieve the desired diameter of the powder cone.
Testing:
1. Pour the powder sample through the funnel onto the base plate, forming a cone.
2. Allow the powder to flow freely until no further movement is observed.
3. Measure the height (h) and radius (r) of the formed cone.
Calculation:
1. Calculate the angle of repose using the formula:
2. Angle of Repose (θ) = tan^-1 (h / r)
3. Where:
  - h is the height of the cone.
  - r

is the radius of the base of the cone.

Acceptance Criteria:

Compare the calculated angle of repose with established acceptance criteria.
Evaluate the flow properties and particle cohesion based on the angle of repose value.

Reporting:

Document the angle of repose test results in the appropriate logbook or electronic system.
Include any deviations noted during testing and actions taken.

Documentation:

Maintain accurate records of all angle of repose testing activities, including raw data, calculations, and reports.
File documentation following Good Documentation Practices (GDP).

5) Abbreviations, if any

SOP: Standard Operating Procedure
QC: Quality Control
QA: Quality Assurance
GDP: Good Documentation Practices

6) Documents, if any

Angle of Repose Testing Protocol, Test Results, Angle of Repose Report

7) Reference, if any

Pharmacopeial guidelines for angle of repose testing of pharmaceutical powders.

8) SOP Version

Version 1.0