SOP for Eye Drop Bottle Sealing

SOP for Eye Drop Bottle Sealing

Standard Operating Procedure for Sealing Eye Drop Bottles

1) Purpose

The purpose of this SOP is to provide guidelines for the proper sealing of eye drop bottles to ensure the sterility and integrity of the ocular dosage forms during and after the sealing process.

2) Scope

This SOP applies to all eye drop bottles filled with ocular dosage forms within the pharmaceutical manufacturing facility, ensuring that they are securely sealed to prevent contamination and leakage.

3) Responsibilities

The responsibilities include operating the sealing equipment, monitoring the sealing process, and maintaining the sealing machinery. Production staff are responsible for following this procedure, and the maintenance team is responsible for regular checks and servicing of the sealing equipment.

See also  SOP for Regulatory Compliance System

4) Procedure

4.1 Preparation

  1. Ensure that the sealing machine is clean and properly sanitized.
  2. Verify that the eye drop bottles are filled and capped correctly.
  3. Set up the sealing machine according to the manufacturer’s instructions, including adjusting the sealing parameters.

4.2 Sealing Process

  1. Place the filled and capped eye drop bottles on the conveyor belt of the sealing machine.
  2. Start the sealing machine and monitor the sealing process to ensure proper operation.
  3. Check the sealed bottles for any defects or irregularities, such as improper seals or leaks.
  4. Remove any defective bottles from the production line
and investigate the cause of the defect.
  • Continue the sealing process until all bottles in the batch are sealed.
  • 4.3 Post-Sealing Inspection

    1. Inspect the sealed bottles for any visible defects or inconsistencies.
    2. Perform a leak test on a sample of sealed bottles to ensure the integrity of the seals.
    3. Document the results of the leak test and any defects found during the inspection.

    4.4 Maintenance

    1. Perform regular cleaning and maintenance of the sealing machine as per the manufacturer’s recommendations.
    2. Check and replace any worn or damaged parts to ensure the machine’s reliability.
    3. Document all maintenance activities in the maintenance logbook.

    5) Abbreviations, if any

    None

    6) Documents, if any

    1. Sealing machine logbook
    2. Maintenance records
    3. Leak test results

    7) Reference, if any

    GMP Guidelines for sealing processes in pharmaceutical manufacturing.

    8) SOP Version

    Version 1.0

    See also  SOP for Aseptic Processing Area

    Related Posts