Standard Operating Procedure for Aseptic Control System in Ocular Dosage Form Manufacturing
1) Purpose
The purpose of this SOP is to establish procedures for the operation, monitoring, and maintenance of the aseptic control system used in the manufacturing of ocular dosage forms to ensure a sterile environment free from contamination.
2) Scope
This SOP applies to all aseptic control systems within the facility used for maintaining aseptic conditions in the manufacturing areas for ocular dosage forms.
3) Responsibilities
Facility management and maintenance personnel are responsible for the operation, monitoring, and maintenance of the aseptic control system. Quality assurance personnel are responsible for overseeing compliance with regulatory requirements and standards.
4) Procedure
4.1 Start-up and Shutdown Procedures
- Ensure all personnel are trained on start-up and shutdown procedures for the aseptic control system.
- Check and verify power supply to the aseptic control unit before starting.
- Follow manufacturer’s instructions for starting up and shutting down the system.
4.2 Routine Operation
- Monitor and record environmental conditions regularly using calibrated instruments.
- Adjust operational settings as necessary to maintain specified aseptic control conditions.
- Monitor alarm systems and respond promptly to any deviations or abnormalities.
4.3 Maintenance and Calibration
- Schedule routine maintenance activities based on manufacturer’s recommendations and facility-specific requirements.
- Verify the accuracy of aseptic control instruments through regular calibration.
- Replace or
4.4 Cleaning and Sanitization
- Clean external surfaces of the aseptic control unit regularly using approved cleaning agents and methods.
- Sanitize internal components of the aseptic control unit as per validated procedures to prevent contamination.
4.5 Emergency Procedures
- Develop and maintain emergency procedures for power failures, equipment malfunctions, or other emergencies affecting the aseptic control system.
- Train personnel on emergency response procedures and ensure the availability of backup systems or contingency plans.
4.6 Documentation and Records
- Maintain records of routine operations, maintenance activities, and calibration results.
- Document any deviations from standard procedures and corrective actions taken.
4.7 Training
- Provide training to personnel involved in the operation, maintenance, and monitoring of the aseptic control system.
- Ensure personnel are aware of SOP updates and revisions related to the aseptic control system.
5) Abbreviations, if any
SOP: Standard Operating Procedure
6) Documents, if any
- Aseptic control system maintenance log
- Calibration certificates
- Emergency response plan
7) Reference, if any
GMP Guidelines for Pharmaceutical Manufacturing
8) SOP Version
Version 1.0
