Standard Operating Procedure for Using Lyophilizer
1) Purpose
The purpose of this SOP is to describe the procedure for the proper operation and maintenance of the lyophilizer used in the manufacturing of otic dosage forms to preserve sensitive materials by freeze-drying.
2) Scope
This SOP applies to all personnel involved in the operation and maintenance of the lyophilizer in the pharmaceutical manufacturing facility.
3) Responsibilities
Operators: Responsible for correctly operating the lyophilizer as per this SOP.
Quality Control (QC) Personnel: Responsible for monitoring the lyophilization process and verifying product specifications.
Maintenance Personnel: Responsible for maintaining the lyophilizer in proper working condition.
4) Procedure
4.1 Operation
4.1.1 Preparation
4.1.1.1 Ensure the lyophilizer is on a stable, level surface in a clean room environment.
4.1.1.2 Verify that the shelves and chamber are clean and free of contamination.
4.1.1.3 Check that the vacuum pump and refrigeration system are operational.
4.1.2 Loading the Lyophilizer
4.1.2.1 Prepare the product or solution to be lyophilized in accordance with the batch record.
4.1.2.2 Load the product into suitable containers and arrange them on the lyophilizer shelves.
4.1.3 Freezing Process
4.1.3.1 Initiate the freezing cycle as per the lyophilizer’s operating procedures.
4.1.3.2 Monitor the temperature of the shelves and product until complete freezing is achieved.
4.1.3.3 Ensure that the product is frozen uniformly without crystallization.
4.1.4 Drying Process
4.1.4.1 Start the drying cycle and gradually reduce the chamber pressure to initiate sublimation.
4.1.4.2 Maintain the appropriate shelf temperature and vacuum levels throughout the drying process.
4.1.4.3 Monitor the progress of drying and adjust parameters if necessary to ensure complete drying.
4.1.5 Product Removal
4.1.5.1 Once drying is complete, restore normal atmospheric pressure to the chamber.
4.1.5.2 Remove the dried product containers from the lyophilizer and inspect for any signs of moisture.
4.1.5.3 Immediately seal the containers to prevent moisture absorption.
4.2 Calibration
4.2.1 Daily Check
4.2.1.1 Perform a daily check of the lyophilizer’s temperature, vacuum, and pressure settings.
4.2.1.2 Verify the accuracy of the temperature probes and pressure gauges.
4.2.1.3 Record the results in the equipment log.
4.2.2 Monthly Calibration
4.2.2.1 Conduct a full calibration of the lyophilizer monthly using standard test methods.
4.2.2.2 Document the calibration results and any adjustments made.
4.3 Maintenance
4.3.1 Routine Maintenance
4.3.1.1 Clean the lyophilizer chamber and shelves after each cycle to remove residual product.
4.3.1.2 Inspect and replace vacuum pump oil and filters as recommended by the manufacturer.
4.3.1.3 Lubricate door seals and moving parts to ensure proper sealing and operation.
4.3.2 Troubleshooting
4.3.2.1 If the lyophilizer fails to achieve proper freezing or drying, refer to the manufacturer’s manual for troubleshooting.
4.3.2.2 Contact maintenance personnel for repairs if issues cannot be resolved.
5) Abbreviations, if any
QC: Quality Control
SOP: Standard Operating Procedure
6) Documents, if any
Lyophilization log
Maintenance log
7) Reference, if any
Manufacturer’s manual for the lyophilizer
Regulatory guidelines for equipment calibration and maintenance
8) SOP Version
Version 1.0
