Standard Operating Procedure for Operating Nebulizer Testing Chambers
1) Purpose
The purpose of this SOP is to define the standardized procedure for operating nebulizer testing chambers to evaluate the performance, safety, and reliability of nebulizers under various conditions.
2) Scope
This SOP applies to all testing chambers used for the performance, environmental, and stress testing of nebulizer units during production and quality assurance processes.
3) Responsibilities
Operators: Execute testing procedures as outlined in this SOP.
Maintenance Team: Ensure proper functioning and calibration of testing chambers.
Quality Assurance (QA): Review and approve test results for compliance with product specifications.
4) Procedure
4.1 Pre-Operation Checks
- Inspect the testing chamber for cleanliness and ensure no residual materials or contaminants are present.
- Verify that the testing chamber is calibrated and that all sensors and monitors are functioning correctly.
- Review the testing parameters, such as temperature, humidity, and airflow, as specified in the test protocol.
- Ensure that all required tools and materials, such as nebulizer units and testing solutions, are available.
4.2 Setting Up the Testing Chamber
- Place the nebulizer unit inside the chamber, ensuring proper alignment with the test setup.
- Secure the unit using clamps or holders to prevent movement during testing.
- Program the testing parameters into the
4.3 Conducting the Test
- Activate the testing chamber and monitor the conditions displayed on the control panel.
- Observe the nebulizer unit during the test for any abnormalities, such as leaks, irregular aerosol generation, or malfunctions.
- Record the performance data, such as aerosol output rate, droplet size, and consistency.
- Ensure that the test runs for the specified duration as per the protocol.
4.4 Post-Test Activities
- Turn off the testing chamber and allow it to cool before opening.
- Remove the nebulizer unit and inspect it visually for any physical damage or residue.
- Clean the chamber as per the cleaning SOP to prepare it for the next test.
- Document the test results in the Nebulizer Testing Log.
4.5 Handling Non-Conforming Units
- Segregate units that fail the test and label them as “Non-Conforming.”
- Inform the QA team for further analysis and decision-making.
- Record details of the non-conformance in the Defective Unit Report.
4.6 Safety Precautions
- Always wear personal protective equipment (PPE), including gloves and safety glasses, during operations.
- Ensure proper ventilation of the chamber, especially when using aerosol-generating substances.
- Follow lockout/tagout (LOTO) procedures when performing maintenance or troubleshooting.
5) Abbreviations
- QA: Quality Assurance
- PPE: Personal Protective Equipment
- LOTO: Lockout/Tagout
6) Documents
The following documents should be maintained:
- Nebulizer Testing Log
- Chamber Calibration Report
- Defective Unit Report
7) References
Relevant regulatory guidelines and references include:
- ISO 13485: Medical Devices Quality Management Systems
- Good Manufacturing Practices (GMP) Guidelines
8) SOP Version
Version: 1.0
Annexure
Annexure Title: Nebulizer Testing Log
| Date | Test Type | Batch No. | Parameters Tested | Operator Initials | Remarks |
|---|---|---|---|---|---|
| DD/MM/YYYY | Performance/Stress | Batch Identifier | Temp, Humidity, Output Rate | Operator Name | Details of test |
Annexure Title: Chamber Calibration Report
| Date | Chamber ID | Parameters Calibrated | Calibration Status | Operator Initials | Remarks |
|---|---|---|---|---|---|
| DD/MM/YYYY | Chamber Identifier | Temp, Humidity, etc. | Pass/Fail | Operator Name | Details of calibration |
Annexure Title: Defective Unit Report
| Date | Batch No. | Defect Type | Defective Units | Operator Initials | Remarks |
|---|---|---|---|---|---|
| DD/MM/YYYY | Batch Identifier | Defect Description | Number of Units | Operator Name | Details of defect |
