SOP Guide for Pharma

Creams: SOP for Weighing and Dispensing of Viscosity Modifiers for Creams – V 2.0

Auditor

Creams: SOP for Weighing and Dispensing of Viscosity Modifiers for Creams – V 2.0

Standard Operating Procedure for Weighing and Dispensing of Viscosity Modifiers for Creams

Department Creams
SOP No. SOP/CRM/014/2025
Supersedes SOP/CRM/014/2022
Page No. Page 1 of 6
Issue Date 05/05/2025
Effective Date 10/05/2025
Review Date 05/05/2026

1. Purpose

The purpose of this Standard Operating Procedure (SOP) is to provide the guidelines for the accurate weighing and dispensing of viscosity modifiers used in the formulation of creams. This ensures that the correct amount of modifiers is dispensed, maintaining the desired viscosity and product consistency while complying with GMP standards.

2. Scope

This SOP applies to the weighing and dispensing of all viscosity modifiers used in cream formulations within the Creams Department. It covers the procedures to be followed for accurate weighing, material handling, and documentation to ensure consistency and compliance with quality standards.

3. Responsibilities

4. Accountability

The Head of Creams Manufacturing is responsible for ensuring that the weighing and dispensing process is carried out correctly. The QA Manager is responsible for overseeing the compliance of the process and ensuring that all necessary documentation is completed accurately.

See also  Creams: SOP for Scale-Up Studies in Cream Manufacturing - V 2.0

5. Procedure

5.1 Pre-Dispensing Preparation

  1. Verify that the formulation recipe includes the correct viscosity modifiers and that they are available in the dispensing area.
  2. Ensure that the material containers are properly labeled with the correct material name, batch number, and expiry date.
  3. Verify that all equipment to be used for weighing (scales, containers, utensils) is calibrated, clean, and free of any contaminants.
  4. Review the production schedule to ensure that the correct viscosity modifiers are used for the current batch.

5.2 Weighing of Viscosity Modifiers

  1. Weigh each viscosity modifier using an appropriately calibrated scale. Ensure that the scale is zeroed before use to ensure accuracy.
  2. Ensure that the correct quantity is weighed according to the formulation recipe. Avoid over-weighing or under-weighing, as it could affect the final product’s consistency and quality.
  3. If the modifier is in powder form, ensure that the material is evenly distributed in the container, and avoid clumping or contamination.
  4. Once the material is weighed, record the quantity in the Material Dispensing Log, including the material name, batch number, weight, time, and personnel involved in the process.
  5. If the required quantity of viscosity modifier is not available, report it immediately to QA and ensure that no substitutions are made without approval.

5.3 Dispensing of Viscosity Modifiers

  1. After weighing, transfer the viscosity modifier into the appropriate container or mixer. Ensure that the material is not exposed to open air for extended periods, especially if it is sensitive to moisture or air.
  2. Use clean and dedicated dispensing equipment to avoid cross-contamination with other materials.
  3. Seal the material container securely and label it with the appropriate information, including the batch number, material name, and dispensing date.
  4. Any excess material should be returned to its designated storage area, provided that it has not been exposed to contaminants. Document the returned material in the Material Return Log.
See also  Creams: SOP for Prototype Batch Development for Creams - V 2.0

5.4 Documentation of Weighing and Dispensing

  1. All weighing and dispensing activities should be documented in the Material Dispensing Log. This includes the material name, batch number, quantity dispensed, date and time, and personnel involved in the weighing and dispensing process.
  2. Any discrepancies or issues during the weighing or dispensing process must be immediately documented in the Material Discrepancy Report and reported to the QA team.
  3. Ensure that all documentation is signed off by the personnel involved and reviewed by the QC team to ensure completeness and accuracy.

5.5 Post-Dispensing Activities

  1. Once the viscosity modifier is dispensed, ensure that it is immediately transferred to the appropriate area for further processing in the cream formulation.
  2. If any unused viscosity modifiers are to be returned to storage, ensure that they are sealed properly and labeled correctly before being placed back in their designated storage area.
  3. Update the inventory system to reflect the quantity used and any remaining quantities for future use.

5.6 Handling of Discrepancies

  1. If any discrepancies arise during the weighing or dispensing process (e.g., incorrect quantity, mislabeled material), document the issue in the Material Discrepancy Report. The QA team should investigate the issue and take appropriate corrective actions.
  2. Any materials found to be incorrectly dispensed must be segregated and reviewed for impact on the batch. Corrective actions should be taken if necessary, and affected materials should not be used in production until approved by QA.
See also  Creams: SOP for Handling and Storage of Active Pharmaceutical Ingredients (APIs) for Creams - V 2.0

5.7 Review and Approval

  1. The QA team will review all dispensing records to ensure that all materials were dispensed correctly and that all documentation is complete and accurate.
  2. Any discrepancies in the dispensing process must be reviewed, and corrective actions should be implemented to prevent future issues.
  3. Once all records are verified, the batch can proceed with further processing in the production area.

6. Abbreviations

7. Documents

  1. Material Dispensing Log (Annexure-1)
  2. Material Discrepancy Report (Annexure-2)
  3. Corrective Action Report (Annexure-3)

8. References

9. SOP Version

Version: 2.0

10. Approval Section

Prepared By Checked By Approved By
Signature
Date
Name
Designation
Department

11. Annexures

Annexure-1: Material Dispensing Log

Material Name Batch Number Quantity Dispensed Dispensed By Time/Date
Viscosity Modifier A 12345 500g John Doe 05/05/2025

Annexure-2: Material Discrepancy Report

Material Name Batch Number Discrepancy Description Corrective Action Taken Reported By Resolution Date
Viscosity Modifier A 12345 Incorrect Weight Dispensed Re-weighed, retrained personnel John Doe 06/05/2025

Annexure-3: Corrective Action Report

Deviation Corrective Action Taken Responsible Person Completion Date
Incorrect Weighing Reviewed equipment calibration, retrained staff John Doe 07/05/2025

Revision History:

Revision Date Revision No. Revision Details Reason for Revision Approved By
01/03/2024 1.0 Initial Version New SOP Creation QA Head
01/03/2025 2.0 Format Revision and Updates Standardization of Document QA Head
Exit mobile version