Job Safety Analysis for Encapsulation Leak Test Apparatus
JSA for Safe Operation of Encapsulation Leak Test Apparatus
| JSA Number |
JSA/OralDosage/046/2025 |
Department |
Oral Dosage |
| Revision Number |
V 1.0 |
Issue Date |
01/02/2025 |
| Effective Date |
05/02/2025 |
Review Date |
05/02/2026 |
1. Purpose
The purpose of this JSA is to identify and mitigate potential hazards associated with the operation of the Encapsulation Leak Test Apparatus. This equipment is used in pharmaceutical manufacturing to verify the integrity of encapsulated drug products by assessing the presence of leaks or defects. Proper handling and operation are essential to maintain the accuracy of leak tests, prevent contamination, and ensure product quality.
2. Scope
This JSA applies to all operators, supervisors, and maintenance personnel involved in using, cleaning, and maintaining the Encapsulation Leak Test Apparatus in the Oral Dosage department. Ensuring compliance with safety measures minimizes risks associated with vacuum testing, exposure to liquid or powder leaks, and incorrect equipment calibration.
3. Responsibilities
Operators:
- Follow the standard operating procedure (SOP) while operating the Encapsulation Leak Test Apparatus.
- Ensure the equipment is properly calibrated before use.
- Wear appropriate Personal Protective Equipment (PPE) to prevent exposure to pharmaceutical powders or liquids.
- Monitor the leak testing process and document results accurately.
- Ensure proper cleaning and maintenance of the equipment.
- Report any equipment malfunctions immediately to the supervisor.
Supervisors:
- Ensure compliance with GMP and workplace safety regulations.
- Monitor equipment efficiency and ensure calibration is performed as scheduled.
- Conduct routine inspections of the Encapsulation Leak Test Apparatus and maintenance logs.
Safety Officers:
- Perform risk assessments and ensure compliance with occupational safety standards.
- Ensure that liquid or dust containment procedures are followed to prevent cross-contamination.
- Verify that PPE, such as gloves, safety glasses, and protective clothing, are used correctly.
4. Definitions & Abbreviations
- PPE: Personal Protective Equipment (e.g., gloves, safety glasses, respirators).
- GMP: Good Manufacturing Practices – Guidelines ensuring product quality and worker safety.
- LOTO: Lockout/Tagout – A procedure to isolate hazardous energy sources.
5. Procedure
| Step |
Task Description |
Potential Hazard |
Risk Level (L/M/H) |
Control Measures |
| 1 |
Machine setup and calibration |
Electrical hazards, incorrect calibration |
Medium |
Ensure proper grounding and calibration before operation. |
| 2 |
Loading encapsulated products for testing |
Manual handling strain, capsule contamination |
Medium |
Use clean handling tools; wear gloves. |
| 3 |
Adjusting vacuum pressure settings |
Misalignment, incorrect testing |
High |
Follow SOP guidelines for setting vacuum levels. |
| 4 |
Leak testing process |
Vacuum-related hazards, capsule breakage |
High |
Ensure proper containment of broken capsules and clean spillages immediately. |
| 5 |
Unloading tested capsules |
Cross-contamination, handling errors |
Medium |
Follow GMP cleaning procedures and use designated collection containers. |
| 6 |
Cleaning and maintenance |
Residual chemical exposure, electrical shock |
High |
Follow LOTO procedures before servicing; wear PPE during cleaning. |
6. Risk Assessment
| Likelihood |
Consequence |
Risk Level |
| Rare |
Minor capsule misalignment |
Low |
| Possible |
Capsule breakage due to excessive vacuum pressure |
Medium |
| Likely |
Leakage leading to cross-contamination |
High |
7. Emergency Procedures
- In case of capsule leakage, stop the machine and notify the supervisor.
- If the system malfunctions, shut it down and report to maintenance.
- For vacuum failure, activate the emergency stop and seek immediate assistance.
- All incidents must be reported and logged for investigation.
8. Required PPE & Safety Controls
- Respiratory mask: Prevents inhalation of airborne powder from broken capsules.
- Safety glasses: Shields eyes from liquid splashes or powder leaks.
- Protective gloves: Prevents direct contact with potentially contaminated capsules.
- Machine guards: Ensures safety from moving parts.
- Vacuum containment unit: Prevents capsule debris from dispersing.
9. References
- OSHA 1910.212 – Machine Guarding Standards.
- ISO 45001 – Occupational Health & Safety Management.
- GMP guidelines for encapsulation integrity testing.
10. Approval Section
| Name |
Designation |
Signature |
Date |
| [Name] |
Prepared By |
|
|
| [Name] |
Checked By |
|
|
| [Name] |
Approved By |
|
|