SOP for Conducting Equipment Validation – V 2.0

Procedure for Conducting Equipment Validation

Department	Quality Assurance (QA)/Engineering/Production
SOP No.	SOP/Ointment/117
Supersedes	V 1.0
Page No.	Page X of Y
Issue Date	[Insert Issue Date]
Effective Date	[Insert Effective Date]
Review Date	[Insert Review Date]

1. Purpose

The purpose of this Standard Operating Procedure (SOP) is to define the systematic approach for conducting equipment validation in ointment manufacturing. Equipment validation ensures that all machinery and systems used in production meet predetermined specifications and regulatory compliance requirements.

2. Scope

This SOP applies to all personnel in the Quality Assurance (QA), Engineering, and Production departments responsible for equipment qualification, performance verification, and validation activities.

3. Responsibilities

Engineering Team: Performs installation and ensures equipment readiness.
QA Officer: Monitors validation activities and ensures compliance with GMP.
Validation Team: Executes validation protocols and documents findings.
Production Supervisor: Ensures adherence to validated operational parameters.
QA Manager: Approves validation protocols and final validation reports.

4. Accountability

The QA and Engineering Managers are accountable for ensuring that equipment validation is conducted as per GMP, FDA, ICH, and WHO guidelines.

5. Procedure

5.1 Equipment Validation Phases

Equipment validation is conducted in three main phases:
- Installation Qualification (IQ)
- Operational Qualification (OQ)
- Performance Qualification (PQ)
Each phase must be documented, reviewed, and approved before progressing to the next stage.

5.2 Installation Qualification (IQ)

Verify the correct installation of equipment as per manufacturer specifications.
Ensure that utilities (electrical, air, water) are properly connected and functional.
Confirm that all required components, instruments, and safety features are installed.
Document serial numbers, equipment specifications, and installation checks.
QA must approve the IQ report before proceeding to the OQ phase.

5.3 Operational Qualification (OQ)

Assess equipment functionality under normal operating conditions.
Conduct test runs to verify operational parameters (temperature, pressure, speed, etc.).
Ensure safety features and interlocks function correctly.
Record data and compare results with predefined acceptance criteria.
Investigate and resolve any deviations before proceeding to PQ.

5.4 Performance Qualification (PQ)

Validate equipment performance under actual production conditions.
Use at least three consecutive production runs to confirm repeatability.
Collect and analyze quality control data (assay, viscosity, homogeneity, etc.).
Verify that the equipment consistently produces batches meeting product specifications.
Document and approve PQ results before commercial production.

5.5 Requalification and Periodic Validation

Conduct periodic requalification of equipment as per predefined schedules.
Validate equipment after major maintenance, modifications, or relocation.
Maintain a validation status log for all critical equipment.

5.6 Validation Report and Approval

Compile all validation data into an Equipment Validation Report.
QA and Engineering must jointly review and approve the final report.
Maintain all validation records for regulatory audits.

6. Abbreviations

GMP – Good Manufacturing Practices
QA – Quality Assurance
OQ – Operational Qualification
IQ – Installation Qualification
PQ – Performance Qualification

7. Documents

Equipment Qualification Protocol (Annexure-1)
Equipment Validation Report (Annexure-2)

8. References

ICH Q9 – Quality Risk Management
WHO GMP Guidelines for Equipment Qualification
US FDA Guidance on Equipment Validation

9. SOP Version

Version 2.0

10. Approval Section

	Prepared By	Checked By	Approved By
Signature
Date
Name
Designation
Department

11. Annexures

Annexure-1: Equipment Qualification Protocol

Validation Parameter	Specification	Acceptance Criteria
Temperature Control	±2°C	Within Limits
Mixing Speed	500-1500 rpm	Compliant
Sealing Integrity	No leakage	100% Compliance

Annexure-2: Equipment Validation Report

Equipment ID	Test Parameter	Result	Final Approval
MIX-2001	Temperature Stability	Compliant	QA Manager
FILL-3002	Sealing Integrity	Pass	QA Manager

12. Revision History:

Revision Date	Revision No.	Details of Revision	Reason for Revision	Approved By
01/01/2024	1.0	Initial Version	New SOP	QA Head
01/02/2025	2.0	Updated SOP Format	Standardization of Document	QA Head