Conducting Phase III Validation for Analytical Method Development

1) Purpose

The purpose of this SOP is to outline the procedure for conducting Phase III validation during the method development process, aiming to demonstrate that the developed analytical method is suitable for its intended purpose.

2) Scope

This SOP applies to all personnel involved in Phase III validation for analytical method development projects within the analytical development department.

3) Responsibilities

The purpose of this SOP is to define the roles and responsibilities of all personnel involved in Phase III validation for analytical method development.

4) Procedure

1. Validation Protocol Preparation:
   1. Prepare a validation protocol outlining the objectives, scope, and methodology for method validation.
   2. Define validation parameters such as accuracy, precision, specificity, detection limit, quantitation limit, linearity, range, and robustness.
2. Execution of Validation:
   1. Perform validation experiments according to the approved protocol.
   2. Conduct experiments under defined conditions and analyze results based on predefined acceptance criteria.
3. Validation Report Preparation:
   1. Compile validation data and prepare a validation report summarizing the results and conclusions.
   2. Include sections on experimental methods, results, discussion, and conclusions.
4. Review and Approval:
   1. Review the validation report for accuracy, completeness, and compliance with protocol requirements.
   2. Obtain necessary approvals from stakeholders before finalizing the validation report.
5. Documentation:
   1. Document the Phase III validation process, including protocol preparation, execution,