SOP Guide for Pharma

SOP for Cleaning Of Dehumidifier

Standard Operating Procedure for Cleaning of Dehumidifier

1. Purpose

The purpose of this SOP is to provide guidelines for the proper cleaning and maintenance of the dehumidifier in order to maintain a controlled environment in compliance with pharmaceutical industry standards.

2. Scope

This SOP applies to all personnel responsible for the operation and maintenance of the dehumidifier within the pharmaceutical facility.

3. Responsibilities

4. Procedure

Follow these steps for the proper cleaning of the dehumidifier:

4.1 Ensure the dehumidifier is powered off and disconnected from the electrical supply.

4.2 Put on appropriate personal protective equipment (PPE), including gloves and safety goggles.

4.3 Remove and dispose of any air filters or pre-filters according to waste disposal procedures.

4.4 Use a soft, lint-free cloth or sponge dampened with a mild detergent solution to wipe down the interior and exterior surfaces of the dehumidifier.

4.5 Pay special attention to areas prone to dust and dirt accumulation, such as coils and fans.

4.6 Rinse the cloth or sponge thoroughly and wipe down all surfaces again to remove any detergent residue.

4.7 Allow all cleaned components to air dry completely.

4.8 Reinstall air filters or pre-filters if applicable.

4.9 Reconnect the dehumidifier to the electrical supply and power it on.

4.10 Conduct a functional check to ensure the dehumidifier is operating correctly.

4.11 Record the cleaning and maintenance activities in the equipment logbook.

5. Abbreviations

No specific abbreviations are used in this SOP.

6. Documents

The following documents are relevant to this SOP:

7. References

No external references are applicable to this SOP.

8. SOP Version

This is Version 1.0 of the SOP for Cleaning of Dehumidifier, issued on [Date].

Exit mobile version