Standard Operating Procedure for Freeze-Thaw Stability Testing for Creams
1) Purpose
The purpose of this SOP is to define procedures for conducting freeze-thaw stability testing on creams. This ensures that creams maintain stability and quality under conditions of repeated freezing and thawing, simulating real-world storage and transportation scenarios.
2) Scope
This SOP applies to the Quality Control Department and personnel responsible for conducting freeze-thaw stability testing of creams. It covers testing methods, acceptance criteria, documentation, and reporting requirements.
3) Responsibilities
The Quality Control Manager is responsible for overseeing freeze-thaw stability testing activities. The Quality Control Team and Testing Technicians are responsible for executing and ensuring compliance with this SOP.
4) Procedure
4.1 Equipment Setup
4.1.1 Prepare freeze-thaw chambers or equipment according to manufacturer instructions.
4.1.2 Verify the calibration status of temperature sensors and controllers before testing begins.
4.1.3 Ensure all necessary safety precautions are in place.
4.2 Sample Preparation
4.2.1 Select representative samples of creams from the batch for testing.
4.2.2 Label each sample with batch information and identification numbers.
4.2.3 Ensure samples are equilibrated to room temperature before testing.
4.3 Freeze-Thaw Cycling Procedure
4.3.1 Place cream samples into the freeze-thaw chambers.
4.3.2 Cycle samples through specified freezing and thawing cycles (e.g., -20°C for 24 hours followed by +25°C for 24 hours),
4.3.3 Ensure gradual transitions between freezing and thawing phases to prevent thermal shock.
4.4 Monitoring and Evaluation
4.4.1 Monitor temperature and humidity levels throughout the freeze-thaw cycles.
4.4.2 Assess samples at defined intervals for changes in physical appearance, texture, consistency, and other quality attributes.
4.4.3 Record observations and measurements of any changes or deviations from baseline characteristics.
4.5 Acceptance Criteria
4.5.1 Establish acceptance criteria based on regulatory requirements and product-specific considerations (e.g., no significant changes in appearance or properties).
4.5.2 Evaluate test results against acceptance criteria to determine pass or fail status for each sample.
4.5.3 Document and justify acceptance or rejection decisions based on test results.
4.6 Documentation and Reporting
4.6.1 Document all freeze-thaw stability testing activities, including equipment setup, test methods, procedures, results, and observations.
4.6.2 Prepare freeze-thaw stability testing reports summarizing test conditions, results, conclusions, and recommendations.
4.6.3 Obtain approval from Quality Control Management for freeze-thaw stability testing reports.
4.7 Retesting and Non-Conforming Samples
4.7.1 Retest samples that fail to meet acceptance criteria using the same or modified freeze-thaw conditions.
4.7.2 Segregate and quarantine non-conforming samples to prevent unintended distribution or use.
4.7.3 Conduct investigations into non-conforming results to identify root causes and implement corrective actions.
5) Abbreviations, if any
SOP: Standard Operating Procedure
QC: Quality Control
ISO: International Organization for Standardization
6) Documents, if any
Freeze-Thaw Stability Testing Protocols
Freeze-Thaw Stability Testing Reports
Non-Conforming Material Reports
Corrective Action Reports
7) Reference, if any
ICH Q1A (R2): Stability Testing of New Drug Substances and Products
USP : General chapters related to stability testing and storage conditions
8) SOP Version
Version 1.0