Standard Operating Procedure for Paste Manufacturing Equipment

1) Purpose

The purpose of this SOP is to provide guidelines for the operation and maintenance of equipment used in the manufacturing of dental pastes to ensure consistent product quality and compliance with regulatory standards.

2) Scope

This SOP applies to all equipment used in the manufacturing process of dental pastes within the pharmaceutical industry.

3) Responsibilities

The Production Department is responsible for operating and cleaning the paste manufacturing equipment. The Quality Assurance (QA) Department is responsible for verifying and documenting compliance with this SOP.

4) Procedure

4.1 Preparation

4.1.1 Verify that the equipment is clean and in good working condition before use.

4.1.2 Ensure all raw materials are weighed and prepared according to the batch record.

4.2 Mixing and Blending

4.2.1 Set up the mixing and blending equipment as per the manufacturer’s instructions and batch record requirements.

4.2.2 Add raw materials into the mixing vessel in the specified order and quantities.

4.2.3 Start the equipment and monitor the mixing process to achieve uniform consistency.

4.2.4 Record the start time, end time, and any observations during the mixing process in the batch record.

4.3 Homogenization (if applicable)

4.3.1 Transfer the mixed paste to the homogenization equipment if additional homogenization is required.

4.3.2 Operate the homogenization equipment as