Standard Operating Procedure for Personal Protective Equipment (PPE) Usage
1) Purpose
The purpose of this SOP is to establish procedures for the selection, use, and maintenance of personal protective equipment (PPE) to ensure the safety and health of personnel working in pharmaceutical manufacturing areas.
2) Scope
This SOP applies to all personnel required to wear PPE within the pharmaceutical manufacturing facility.
3) Responsibilities
3.1 Employees
- Wear appropriate PPE as required by job tasks and risk assessments.
- Inspect and maintain PPE in good condition.
3.2 Safety Officer
- Conduct PPE assessments and recommend appropriate PPE based on job hazards.
- Monitor PPE compliance and provide training as necessary.
4) Procedure
4.1 PPE Selection
- Identify hazards and assess risks to determine PPE requirements.
- Select appropriate PPE (e.g., gloves, goggles, respirators) based on hazard assessment.
4.2 PPE Use
- Wear PPE correctly and consistently during designated activities.
- Replace PPE that is damaged or worn out immediately.
4.3 Maintenance and Storage
- Clean and sanitize reusable PPE after each use.
- Store PPE in designated areas away from contaminants and environmental hazards.
4.4 Training and Awareness
- Provide training on proper PPE use, maintenance, and limitations.
- Ensure employees understand the importance of PPE in preventing workplace injuries and illnesses.
5) Abbreviations, if any
PPE: Personal Protective Equipment
6) Documents, if any
- PPE Assessment Records
- Training Certificates
- PPE Inspection and Maintenance Logs
7) Reference, if any
OSHA 29 CFR 1910.132: General requirements for personal protective equipment
CDC Guidance for PPE in Healthcare Settings
8) SOP Version
Version 1.0