SOP Guide for Pharma

Vaginal Dosage Forms: SOP for Ring Forming Tool

SOP for Ring Forming Tool

Operation and Maintenance of Ring Forming Tool

1) Purpose

The purpose of this SOP is to outline the procedures for operating and maintaining the ring forming tool used in the manufacturing process of rings.

2) Scope

This SOP applies to all personnel involved in the operation, cleaning, and maintenance of the ring forming tool in the manufacturing facility.

3) Responsibilities

It is the responsibility of production operators, maintenance staff, and quality control personnel to follow this SOP to ensure proper operation and maintenance of the ring forming tool.

4) Procedure

4.1 Preparation

  1. Verify the availability of ring materials and batch records.
  2. Inspect the ring forming tool for cleanliness and proper functioning of forming dies, controls, and safety mechanisms.
  3. Ensure all safety protocols are followed, including using protective equipment.

4.2 Forming Process

  1. Set up the forming tool according to ring size and shape specifications.
  2. Feed the ring material into the forming dies and initiate the forming process.
  3. Monitor the forming process to ensure accurate shaping and sizing of rings.

4.3 Cleaning and Maintenance

  1. After completing the forming process, clean the tool thoroughly to remove any residues.
  2. Inspect and lubricate forming dies and components as per maintenance schedule.
  3. Document cleaning and maintenance activities in the logbook.

5) Abbreviations, if any

N/A

6) Documents, if any

Batch production record, Cleaning log, Ring

forming tool specifications

7) Reference, if any

GMP guidelines, Manufacturer’s operating manual for ring forming tool

8) SOP Version

Version 1.0

Exit mobile version