SOP for Temperature and Humidity Monitoring in Production Areas

Standard Operating Procedure for Temperature and Humidity Monitoring in Production Areas

1) Purpose

This SOP outlines the procedures for monitoring and controlling temperature and humidity levels in GMP production areas to ensure product quality and compliance with regulatory standards.

2) Scope

This SOP applies to all personnel involved in the monitoring and recording of temperature and humidity levels in controlled areas at [Company Name].

3) Responsibilities

Operators: Record temperature and humidity levels at specified intervals and report any deviations.
Maintenance Team: Ensure HVAC systems are functioning properly and within the specified parameters.
Quality Assurance (QA): Review environmental logs and investigate any deviations from set parameters.

4) Procedure

4.1 Monitoring Equipment

4.1.1 Calibration of Monitoring Devices

Ensure that all temperature and humidity monitoring devices are calibrated regularly to ensure accuracy. Record all calibrations in the calibration log.

4.1.2 Placement of Monitoring Devices

Place temperature and humidity sensors in critical areas of the production facility. Ensure sensors are not obstructed and are placed away from heat sources, doors, and windows.

4.2 Recording and Reporting

4.2.1 Temperature and Humidity Readings

Record temperature and humidity levels at least twice per shift (e.g., every four hours) or as required by production standards. Ensure readings are within the specified range for the product being manufactured.
If any deviation occurs, report it immediately to the supervisor and document it in the environmental control log.

4.2.2 Response to Deviations

In the event of temperature or humidity deviations, stop production immediately, and investigate the cause. Make adjustments to HVAC systems if necessary and document corrective actions.
Record deviations in the deviation log and submit for QA review.

4.3 Post-Monitoring Activities

4.3.1 Documentation

Record all temperature and humidity readings in the environmental control log. Ensure the log is reviewed by QA at the end of each shift.

4.3.2 Maintenance of HVAC Systems

Perform routine maintenance of HVAC systems to ensure optimal performance. Document any repairs or maintenance in the equipment log and submit for QA review.

5) Abbreviations, if any

HVAC: Heating, Ventilation, and Air Conditioning
QA: Quality Assurance

6) Documents, if any

Environmental Control Log
Calibration Log
Deviation Log

7) References, if any

Internal SOP for HVAC maintenance

8) SOP Version

Version 1.0

Annexure

1. Temperature and Humidity Monitoring Log Template


  
    Date
    Room ID
    Temperature (°C)
    Humidity (%)
    Operator Initials
    QA Approval
  
  
    DD/MM/YYYY
    Room Identifier
    Temperature Measured
    Humidity Measured
    Operator Name
    QA Name

Date	Room ID	Temperature (°C)	Humidity (%)	Operator Initials	QA Approval
DD/MM/YYYY	Room Identifier	Temperature Measured	Humidity Measured	Operator Name	QA Name